Waveshare Industrial Bidirectional Converter, USB to RS485, Onboard Original FT232RNL and SP485EEN

Post/DHL, UPS, Andere, Versand nach CH, Versand nach A

Waveshare Industrieller USB-RS485-Konverter, Blitzschutz, ESD-Sicher, bidirektional, FT232RL

Post/DHL, UPS, Trans-o-Flex, Spedition

Übersicht Dies ist ein industrieller USB-zu-RS485-Konverter mit original FT232RL und SP485EEN im Inneren. Er verfügt über eingebettete Schutzschaltungen wie Blitzschutz, rücksetzbare Sicherung, ESD-Schutz und TVS-Diode, etc. Spezifikationen - Produkttyp: Industriekonverter - Baudrate: 300-921600bps - Host-Anschluss: USB - Geräteanschluss: RS485 - USB: - Betriebsspannung: 5V - Anschluss: USB-A - Schutz: 200mA Selbstrückstellende Sicherung, ESD-Schutz - Übertragungsreichweite: ca. 5m - RS485: - Anschluss: Schraubklemme - Pins: A+, B-, GND - Richtungssteuerung: automatische Hardware-Steuerung - Schutz: 600W blitz- und überspannungsfest, 15KV ESD-Schutz (integrierter 120R-Abgleichwiderstand) - Übertragungsreichweite: ca. 1200m (niedrige Rate) - Übertragungsmodus: Punkt-zu-Mehrpunkt (bis zu 32 Knoten, es wird empfohlen, Repeater für 16 Knoten oder mehr zu verwenden) - LED-Anzeigen: - PWR: rote Stromanzeige, leuchtet, wenn eine USB-Verbindung besteht und Spannung erkannt wird - TXD: rote TX-Anzeige, leuchtet, wenn der USB-Anschluss Daten sendet - RXD: rote RX-Anzeige, leuchtet auf, wenn die Geräteanschlüsse Daten zurücksenden - Betriebsumgebung: - Temperatur: -15°C ~ 70°C - Luftfeuchtigkeit: 5% ~ 95%RH - Betriebssystem: Mac, Linux, Android, WinCE, Windows 10/8.1/8/7/XP Wiki : www.waveshare.com/wiki/USB_TO_RS485 Lieferumfang - USB ZU RS485 x1 - USB-A Stecker auf Buchse Kabel x1 - Schraubendreher x1

International, Post/DHL, Andere, Versand nach CH, Versand nach A

This Converter support USB to RS485 bidirectional conversion. Due to its stable communication, it's ideal for industrial control equipments and/or applications with high communication requirement. with 3 LEDs for indicating the power and transceiver status, PWR: red power indicator, light up when there is USB connection and voltage is detected, TXD: red TX indicator, light up when the USB port sends data, RXD: red RX indicator, light up when the device ports send data back Baudrate: 300-921600bps; Host port: USB, Device port: RS485; Operating system: for Mac/Linux/Android/WinCE/Windows10/8.1/8/7/XP; Operating environment: Temperature: -15°C ~ 70°C, Humidity: 5%RH ~ 95%RH Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, Lighningproof & anti-electrostatic; Onboard resettable fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage proof, improves shock resistance RS485→Connector: screw terminal; Pins: A+, B-, GND; Direction control: hardware automatic control; Protection: 600W Lighning-proof and surge-suppress, 15KV ESD protection (onboard 120R balancing resistor); Transmission distance: about 1200m (low rate); Transmission mode: point-to-multipoints (up to 32 nodes, it is recommended to use repeaters for 16 nodes or more) USB→Operating voltage: 5V, Connector: USB-A, Protection: 200mA self-recovery fuse, ESD protection, Transmission distance: about 5m; Provide online user manual, please refer to it while using

International, Post/DHL, Andere, Versand nach CH, Versand nach A

This Converter support USB to RS485 bidirectional conversion. Due to its stable communication, it's ideal for industrial control equipments and/or applications with high communication requirement. with 3 LEDs for indicating the power and transceiver status, PWR: red power indicator, light up when there is USB connection and voltage is detected, TXD: red TX indicator, light up when the USB port sends data, RXD: red RX indicator, light up when the device ports send data back Baudrate: 300-921600bps; Host port: USB, Device port: RS485; Operating system: for Mac/Linux/Android/WinCE/Windows10/8.1/8/7/XP; Operating environment: Temperature: -15°C ~ 70°C, Humidity: 5%RH ~ 95%RH Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, Lighningproof & anti-electrostatic; Onboard resettable fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage proof, improves shock resistance RS485→Connector: screw terminal; Pins: A+, B-, GND; Direction control: hardware automatic control; Protection: 600W Lighning-proof and surge-suppress, 15KV ESD protection (onboard 120R balancing resistor); Transmission distance: about 1200m (low rate); Transmission mode: point-to-multipoints (up to 32 nodes, it is recommended to use repeaters for 16 nodes or more) USB→Operating voltage: 5V, Connector: USB-A, Protection: 200mA self-recovery fuse, ESD protection, Transmission distance: about 5m; Provide online user manual, please refer to it while using